15 mock-test questions across RCC, steel, geotech, loads and general theory. Filter by topic, answer, then submit for an instant score and worked explanations.
- Q1·RCC
Limiting neutral axis depth ratio xu,max/d for Fe415 (IS 456)?
- Q2·RCC
Partial safety factor for concrete in limit state design?
- Q3·RCC
Modulus of elasticity of concrete per IS 456?
- Q4·RCC
Minimum grade of concrete for 'severe' exposure (RCC)?
- Q5·Steel
Partial safety factor γm0 for yielding (IS 800)?
- Q6·Steel
A 'plastic' section can develop its…
- Q7·Steel
Lateral-torsional buckling is critical for…
- Q8·Geotech
SPT uses a hammer of mass…
- Q9·Geotech
Rankine active pressure coefficient Ka for φ=30°?
- Q10·Geotech
Liquefaction is most associated with…
- Q11·Loads
Seismic zone factor Z for Zone V (IS 1893)?
- Q12·Loads
Importance factor I for hospitals (IS 1893)?
- Q13·Loads
Basic wind speed in IS 875-3 corresponds to…
- Q14·General
Characteristic strength is the value below which…
- Q15·General
Limit State of Serviceability mainly checks…
Daily Challenge
One fresh design puzzle every day — same problem for everyone. Build a streak.
Play today'sUniversity Mode
Guided, worked examples that teach the design workflow step by step.
Start learningEducational practice questions for exam prep — cited values follow the relevant IS codes.